About KDRILLS Peripheral Wheels
Peripheral wheels cut and polish the edge profile of a countertop on CNC work centers. This family covers the profile wheels of the KDRILLS stone line for marble and granite, one series for each edge shape: A, B, D, E, F, FB, FV, FZ, G, GV, IS, O, Q, T, V and Z. There is also a Wheels by Draw page for profiles that are not on the list.
The data sheets are organized by profile, then by slab thickness, then by radius. Slab thicknesses listed across the family are 20, 30, 40 and 50 mm, and the radius depends on the profile and the thickness. The usual wheel diameter is 120 mm, with 80 mm for some profiles, 140 mm for the O profile at 50 mm, and 40 to 120 mm for the T profile. The hole is 22 or 35 mm.
A standard set has one segmented diamond wheel in the first position for roughing, three continuous band wheels for finishing, and a set of rubber or resinoid polishers. Calibrated wheels are available too. The positions on the data sheets are marked 1B, 2H, 3N and 4S, followed by resin polishing steps.
Start with a single profile, for example the A Profile or the T Profile. Then tell us the slab thickness, the radius, the hole and the machine through the contact page or [email protected].
Questions and answers
Which edge profiles do you list?
A, B, D, E, F, FB, FV, FZ, G, GV, IS, O, Q, T, V and Z, plus a Wheels by Draw page for custom profiles.
What does a standard set contain?
One diamond segmented wheel in the first position for roughing, three continuous band wheels for finishing, and one set of rubber or resinoid polishers.
Which slab thicknesses are covered?
The data sheets list 20, 30, 40 and 50 mm. Which of them exist depends on the profile, so check the profile page or ask us.
Can a profile that is not on the list be made?
KDRILLS makes wheels to drawing (Wheels by Draw). Send the drawing of the profile, the slab thickness and the machine to [email protected].
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.