KDRILLS Tools for Bridge Routers
Bridge routers are the CNC machines that sit on a bridge over the slab and drive the spindle for drilling and routing. On this machine type the KDRILLS stone line lists two families of drill bit, both on the Stone Tools for Bridge Routers page.
Drill Bits for CNC Machines (series FFG and IFG) are the KDRILLS stone line drill bits listed for bridge routers in marble and granite. They have a 1/2 inch gas junction and a 55 mm working height. The stone line also lists Dekton Drill Bits for CNC Machines (series IFDK) in diameters from 4 to 100 mm.
Both can be ordered with non-standard options, and the CNC bits can have a left junction. Tell us the junction on your machine, the diameter, and whether the hole is through or blind. Use the contact page or write to [email protected].
Questions and answers
Which drill bits are listed for bridge routers?
Drill Bits for CNC Machines and Dekton Drill Bits for CNC Machines.
Do the bits have a standard junction?
The CNC drill bits are listed with a 1/2 inch gas junction. Check your adapter, and ask us about a left junction if you need one.
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.