About KDRILLS Routers
Routers, also called finger bits, mill the inside of a sink cut-out, a cooktop opening or any shape that a straight cut cannot make. This family holds the standard stone routers of the KDRILLS stone line, made for marble and granite.
The Standard Routers (series FR) come in two diameters, 20 and 24 mm, with a 5 mm segment. The working height is offered at 35, 42, 45, 48 and 60 mm, so you can match the tool to the slab thickness and to how deep your machine is programmed to cut. The data sheet lists each code with its diameter and working height.
They are listed for CNC work centers. If your shop cuts the opening in several shallow passes instead, look at the Routers for Cut in Several Steps. For the edge that follows the cut, the Profiling Routers are a better fit.
Non-standard dimensions are available to your drawing. When you ask for a quote, give us the diameter, the working height, the material and the machine, and tell us if you already run a specific router so we can match it. Use the contact page or write to [email protected].
Questions and answers
What diameters do the standard routers come in?
The Standard Routers (series FR) are listed at 20 mm and 24 mm diameter, with working heights of 35, 42, 45, 48 and 60 mm.
Which machines run these routers?
They are listed for CNC work centers. The product page names no other machine type, so give us the make and model of yours and the holder it takes.
Can a router be made to my drawing?
KDRILLS makes non-standard dimensions to drawing. Send the drawing or the key dimensions with your inquiry.
Which working height should I pick?
It depends on the slab thickness and on how your machine is programmed. Tell us the thickness and the cut you make, and we will check them against the listed tools.
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.