KDRILLS Tools for Hand Drills
Hand drills cover holes drilled by hand rather than on a machine table. The Stone Tools for Hand Drills page lists three KDRILLS stone line families for them.
Drill Bits for Hand Machines (series FG and IG) have a 5/8 inch UNC junction, a total height of 80 mm and a 55 mm working height, and are listed in diameters from 4 to 100 mm. The Blind Drill Bits (series FCI) are for holes that stop inside the slab. The Dekton Drill Bits for Hand Machines are the hand-machine version of the Dekton family.
Because the junction is the first thing to check on a hand machine, tell us the thread on your drill, the diameter and the material when you ask for a quote. Use the contact page or write to [email protected].
Questions and answers
Which bits are listed for hand drills?
Drill Bits for Hand Machines, Blind Drill Bits and Dekton Drill Bits for Hand Machines.
What junction do the hand drill bits have?
The Drill Bits for Hand Machines are listed with a 5/8 inch UNC junction. Check the thread on your drill before ordering.
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.