About KDRILLS Stubbing Wheels
Stubbing wheels remove the waste stone from the edge of a slab before the profile wheels work on it. In a typical CNC edge sequence they come first, so the finishing wheels do less work (see the guide to the tool sequence for a countertop edge). The Stubbing Wheels of the KDRILLS stone line are made for marble and granite on CNC work centers.
They are series KRI. The product page lists diameters of 50, 54, 85 and 90 mm and thicknesses of 20, 25 and 30 mm. The wheels are sintered and are made in both segmented and slotted shapes. Both are available; tell us which one you want. The data sheet lists each wheel with its hole size, the number of fixing holes, the number of sectors and the material it was made for.
The data sheet also lists adapters for the wheels, with a 1/2 inch gas bore among the options, and further diamond edge and flat wheels, numbered by position. Non-standard dimensions can be made to drawing.
After stubbing, the edge goes to the profile wheels for shaping. To choose a stubbing wheel, send us the machine, the hole or adapter, the slab thickness and the stone you cut, using the contact page or [email protected].
Questions and answers
What diameters and thicknesses are listed?
Diameters of 50, 54, 85 and 90 mm, and thicknesses of 20, 25 and 30 mm.
Segmented or slotted: which one should I choose?
Both are made as sintered wheels. Send us your machine, your stone and the wheel you run now, and we will check them against the listed tools.
Can the wheel be made to a different size?
Non-standard dimensions are made to drawing. Send the drawing with the machine and the hole size.
Are adapters listed?
The data sheet lists adapters for the stubbing wheels, including a 1/2 inch gas bore. Check the hole size on your spindle when you ask for a quote.
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.