About KDRILLS Routers for Cut
Cutting stone in several steps means the router removes the material in successive passes instead of one deep cut. The Routers for Cut in Several Steps are the KDRILLS stone line tools built for this job on CNC work centers.
They belong to series FR. The product page lists diameters of 14, 16, 20, 25 and 30 mm, working heights of 18 and 20 mm, and junctions M12 and M14; the data sheet lists routers at 20, 25 and 30 mm. The data sheet separates the routers by material, with one group for granite and one for marble, and it also lists bit holders at 18 and 23 mm with a 1/2 inch gas shank in several working lengths and with M12 or M14 threads. You choose the diameter, the thread and the reach you need.
All the routers can be ordered with a left junction, and non-standard routers and holders can be made on request.
If you only need a plain finger bit, compare it with the Standard Routers. To get a recommendation, send us the machine, the material, the cut depth and the thread on your holder through the contact page, or write to [email protected].
Questions and answers
What is the difference between these routers and the standard ones?
These are made for cutting in several steps and have a threaded junction for use with a holder. The Standard Routers are a separate family, listed at 20 and 24 mm with longer working heights.
What threads are available?
The product page lists M12 and M14 junctions. The holders are listed with a 1/2 inch gas shank.
Can I order a left-hand junction?
Left junction is available on request. State it in your inquiry.
Can non-standard holders be ordered?
Non-standard routers and holders can be made to order. Send the dimensions to [email protected].
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.