About KDRILLS Profiling Routers
Small-diameter wheels shape an edge in places a full-size wheel cannot reach, such as the inside of a sink cut-out. The Profiling Routers are the tools for that work on CNC work centers, and the data sheet notes that they are suitable for sink cut-outs.
The data sheet lists the A, E, T and Z shapes on a 1/2 inch gas junction, in 20 and 25 mm diameters. They are arranged by slab thickness (20, 30 and 40 mm) and by position, with the sequence 1B, 2H and 3N followed by further positions up to 7. The same logic as on the full-size profile wheels applies: a roughing position first, then finishing, then polishing.
The product page says small-diameter profiled wheels are made in different diameters and for all thicknesses, and the standard set follows the same order as the profile wheels.
These tools complement the full-size profile wheels, since the cut-out edge usually has to match the outer edge. Tell us the profile, the thickness, the diameter and the machine through the contact page or [email protected].
Questions and answers
Which profiles are available as profiling routers?
The data sheet lists A, E, T and Z shapes. Other diameters and shapes can be discussed with us.
What diameters are listed?
20 mm and 25 mm, on a 1/2 inch gas junction.
Are they for sink cut-outs?
The data sheet notes that they are suitable for sink cut-outs. It lists 20 and 25 mm diameters on a 1/2 inch gas junction, so check the holder on your machine.
Can the profile match my outer edge?
Tell us the profile you run on the full-size wheels and the slab thickness. Send us the details and we will check them against the listed tools.
Need a tool for your machine?
Tell us the machine, the material and the profile. We reply with the right KDRILLS tool.